SELECTIVE
PHOTODIODES
EPD-470-0/0.9, blue selective photo diode, peak sensitivity at 470 nm
EPD-470-0-1.4, GaP, 50% at 420 .. 520 nm, peak sensitivity at 470 nm, TO18, datasheet
EPD-470-1/0.9, blue selective photo diode, peak sensitivity 470 nm, datasheet
EPD-470-1/1.4, blue selective photo diode, peak sensitivity 470 nm
EPD-520-0/0.9, green selective photo diode, peak sensitivity 520 nm
EPD-520-1/0.5, green selective photo diode, peak sensitivity 520 nm
EPD-525-0-1.4, GaP, 50% at 480 .. 560 nm, peak sensitivity at 525 nm, TO18, datasheet
EPD-520-1/0.9, green selective photo diode, peak sensitivity at 520 nm, datasheet
EPD-520-1/1.4, green selective photo diode, peak sensitivity at 520 nm
EPD-660-1/0.4, red selective photo diode, peak sensitivity at 660 nm
EPD-660-5/0.4, red selective photo diode, peak sensitivity at 660 nm
EPD-660-1/0.5, red selective photo diode, peak sensitivity at 660 nm
EPD-660-5/0.5, red selective photo diode, peak sensitivity at 660 nm, datasheet
EPD-740-0/1.0, IR selective photo diode, sensitivity 718 - 763 nm
EPD-740-1/0.4, IR selective photo diode, sensitivity 718 - 763 nm, datasheet
EPD-740-1/0.5, IR selective photo diode, sensitivity 718 - 763 nm
EPD-740-5/0.4, IR selective photo diode, sensitivity 718 - 763 nm
EPD-740-5/0.5, IR selective photo diode, sensitivity 718 - 763 nm, datasheet
EPD-850-1/0.4, IR selective photo diode, sensitivity 795 - 870 nm
EPD-850-1/0.5, IR selective photo diode, sensitivity 795 - 870 nm
EPD-850-5/0.4, IR selective photo diode, sensitivity 795 - 870 nm
EPD-850-5/0.5, IR selective photo diode, sensitivity 795 - 870 nm, datasheet
EPD-880-0-1.4, GaAs, 50% at 820 .. 935 nm, peak sensitivity at 890 nm, TO18, datasheet
get spectral sensitivity overview
applications:
optical communication, safety equipment, sensors
features:
narrow band wavelength detection without optical filter
high efficiency
high speed
low noise
PHOTODIODE AMPLIFIERS
MULTIBOARD, general purpose photodiode amplifier board
ideal low noise and high gain amplifier for photodiodes based on Si, Ge, GaP, SiC and TiO2
2 channels, supply voltage:+/-9 ... +/-24 VDC, datasheet
DIGIBOARD, general purpose photodiode amplifier board
ideal low noise and high gain amplifier for photodiodes based on Si, Ge, GaP, SiC and TiO2
2 channels, supply voltage: 5 ... 18 VDC, datasheet
AMPCON 4-20, photodiode current loop amplifier, converts 0 nA to 800 nA photodiode current to 4 mA to 20 mA
signal output current. PCB size: 11.3 x 77.7 mm². input 3.5 mm audio connector for the photodiode sensor,
output: screw terminal, supply voltage 11.. 28 VDC, signal offset and gain adjustable, datasheet
