SILICON PHOTODIODES
PIN silicon photodiode series with integrated low noise JFET transimpedance amplifier, integrated feedback resistor and capacitor, hermetical TO5 package with collimating glass lens, very low offset and drift parameters, dual supply voltage +/-5 V up to +/-18 V, operating temp.: -25° .. +85°C, RoHS and WEEE conformity
IQ800L, active area 4.8mm², transimpedance 100 MOhm, 35 µs, 10 kHz, +/- 50 degree
IQ801L, active area 4.8mm², transimpedance 10 MOhm, 15 µs, 25 kHz, +/- 50 degree
IQ802L, active area 4.8mm², transimpedance 1 MOhm, 3 µs, 120 kHz, +/- 50 degree
PD035P96, PIN photodiode, active area 3.0 x 3.0 mm², TO39, datasheet
PD032-01, PIN photodiode, active area 2.8 x 2.8 mm², 5 mm clear epoxy, datasheet
AVALANCHE PHOTODIODES SERIES AD - typical values at 22° C
see all packages here...
UV ENHANCED PHOTODIODES SERIES 2 - typical values at 22° C
see all packages here...
LOW SERIES RESISTANCE PHOTODIODES SERIES 4 - typical values at 22° C
see all packages here...
HIGH SPEED EPITAXIAL PIN PHOTODIODES SERIES 5 - typical values at 22° C
see all packages here...
LOW DARK CURRENT PIN PHOTODIODES SERIES 6 - typical values at 22° C
see all packages here...
LOW CAPACITANCE PIN PHOTODIODES SERIES 7 - typical values at 22° C
see all packages here...
POSITION SENSING PHOTODIODES (PSD) SERIES 4 - typical values at 22° C
see all packages here...
QUADRANT PHOTODIODES - typical values at 22° C
see all packages here...
WAVELENGTH SENSITIVE PHOTODIODES - typical values at 22° C
see all packages here...
PHOTODIODE AMPLIFIERS
MULTIBOARD, general purpose photodiode amplifier board
ideal low noise and high gain amplifier for photodiodes based on Si, Ge, GaP, SiC and TiO2
2 channels, supply voltage:+/-9 ... +/-24 VDC, datasheet
DIGIBOARD, general purpose photodiode amplifier board
ideal low noise and high gain amplifier for photodiodes based on Si, Ge, GaP, SiC and TiO2
2 channels, supply voltage: 5 ... 18 VDC, datasheet
AMPCON 4-20, photodiode current loop amplifier, converts 0 nA to 800 nA photodiode current to 4 mA to 20 mA
signal output current. PCB size: 11.3 x 77.7 mm². input 3.5 mm audio connector for the photodiode sensor,
output: screw terminal, supply voltage 11.. 28 VDC, signal offset and gain adjustable, datasheet
get online prices and datasheets from here: downloads
GmbH
Wiedner Hauptstrasse 76, 1040 Vienna, Austria, Europe
Tel.: +43-1-586 52 43 - 0
Fax: +43-1-586 52 43 44
UID: ATU61938489
FN: 266954 f
last update 2007-07-11