LASER CRYSTALS
CRYSTAL-808-532
Easy to use, plug&play glued crystal assembly for generating green 532 nm laser light
by pumping with 808 nm light from laser diodes. Very high efficiency. Containing both
crystals Nd:YVO4 + KTP, HR and HT coatings for a simplest and uncritical setup to make
a green frequency doubled laser system. CRYSTAL-808-532 can be used to generate green laser
light up to several 100 mW cw depending on the pump laser power.
Technical Specifications:
Parallelism: Less then 10 arc seconds
Coatings:
Input Surface: HR-(1064/532) nm, HT-808 nm
R>99.8%@1064 nm, R>99%@532 nm, R<5%@808 nm
Output Surface: HR-1064 nm, HT-532 nm
R>99.8%@1064 nm, R<5%@532 nm
Input Wavelength: 808 nm (typ.)
Output Wavelength: 532 nm
Beam Mode: TEMoo
Clear Aperture: >80%
Output Power: 2 mW ~ 10 mW (@200 mW pump power)
Size: 1.3 x 1.3 x 3.5 mm³ (Nd:YVO4 + KTP)
Operating Temperature: 20 .. 30 °C
Nd:YAG rods for lamp pumped lasers
Nd.: 0.8%, 1.0% or 1.1%, ARC at 1064 nm
Nd:YAG Ø 4.00 mm x 50.00 mm
Nd:YAG Ø 4.00 mm x 80.00 mm
Nd:YAG Ø 4.00 mm x 110.00 mm
Nd:YAG Ø 6.35 mm x 102.00 mm
Nd:YAG Ø 6.35 mm x 152.00 mm
Nd:YAG Ø 5.00 mm x 127.00 mm barrel face polished, convex or concave end face
Nd:YAG Ø 6.00 mm x 103.00 mm barrel face polished, convex or concave end face
Nd:YAG Ø 6.00 mm x 127.00 mm barrel face polished, convex or concave end face
Nd:YAG rods for diode pumped lasers
HR at 1064 nm, ARC at 808 nm one end, ARC at 1064 nm at the other end
Nd:YAG Ø 2.00 mm x 5.00 mm
Nd:YAG Ø 4.00 mm x 7.00 mm
Nd:YAG Ø 3.00 mm x 10.00 mm
Nd:YAG Ø 5.00 mm x 8.00 mm
Nd:YAG Ø 3.00 mm x 5.00 mm flat/convex, barrel face polished
Nd:YAG Ø 8.00 mm x 10.00 mm
Nd:YVO4 rods for diode pumped lasers
Nd:YVO4 3.00 mm x 3.00 mm x 1.20 mm
Nd concentration 2 %
side 1: ARC at 808 nm, HR at 1064 nm
side 2: ARC at 1064 nm
Nd:YVO4 4.00 mm x 4.00 mm x 8.60 mm
Nd concentration 0.2 %
side 1: ARC at 808 nm, HR at 1064 nm
side 2: ARC at 1064 nm
Nd:YVO4 4.00 mm x 4.00 mm x 8.60 mm
Nd concentration 0.5 %
side 1: ARC at 808 nm, HR at 1064 nm
side 2: ARC at 1064 nm
Nd:YVO4 Ø 3.00 mm x 5.00 mm, a-cut
ARC on both sides
barrel rough grind
RUBY rod
RUBY Ø 6.35 mm x 65.00 mm
flat / flat, ARC at 694.3 nm, 0.05 % Cr
NONLINEAR OPTICAL CRYSTALS
KTP 5.00 mm x 5.00 mm x 25 mm
x-cut, theta = 90 °, phi = 0°
both sides ARC at 1064 nm, 1500-1600 nm
KTP 2.00 mm x 2.00 mm x 5.00 mm
ideal for SHG 1064 nm -> 532 nm
both sides ARC at 1064 nm / 532 nm
KTP 2.00 mm x 2.00 mm x 7.00 mm
ideal for SHG 1064 nm -> 532 nm
both sides ARC at 1064 nm / 532 nm
LBO 2.00 mm x 2.00 mm x 10.00 mm
type 1 for SHG 1064 nm -> 532 nm
both sides ARC at 1064 nm / 532 nm
LBO 4.00 mm x 4.00 mm x 12.00 mm
type I for SHG 1064 nm -> 532 nm
both sides ARC at 1064 nm / 532 nm
LBO 4.00 mm x 4.00 mm x 12.00 mm
type I, II for THG 1064 nm
ARC at 1064 nm / 532 nm input face
ARC at 355 nm output face
LBO 3.00 mm x 3.00 mm x 5.00 mm
SHG 1064 nm
LBO 4.00 mm x 4.00 mm x 18.00 mm
BBO 4.00 mm x 4.00 mm x 7.00 mm
SHG 1064 nm
BBO 8.00 mm x 8.00 mm x 0.50 mm
BBO 8.00 mm x 4.00 mm x 5.00 mm
SHG 520 nm
DKDP 14.00 mm x 14.00 mm x 30.00 mm
D > 95 %
LiNbO3 9.00 mm x 9.00 mm x 12.00 mm
LiNbO3 X-cut, 3" wafer
LASER OPTICAL COMPONENTS
BK-7 glass coupler
Ø 13 mm
d = 5.3 mm
scratch-dig 10-5
side 1: ROC with r= 51 mm, concave
l/8
HR at 1064 nm, HT at 532 nm
R > 99.8% at 1064 nm, R < 5% at 532 nm
side 2: PLANO
l/10
AR at 532 nm, R < 0.1% at 532 nm
BK-7 glass mirror
Ø 1" x 1/4"
fl/fl, HR at 1064 nm
BK-7 glass mirror
Ø 1" x 1/4"
fl/convex, R = 0.5 m
HR on convex side, flat side uncoated
ZnSe mirror
Ø 20 mm +0.00 -0.13 mm
FL = 50 mm
center thickness = 2.0 mm +/- 0.1 mm
edge thickness = 1.8 mm
clear aperture: 90% of diameter
surface irrg.: /40 at 10.6 µm over clear aperture
ARC for 10.6 µm
40-30 scratch dig
Nonpolarizing Beam Splitter Cube
20 mm x 20 mm x 20 mm
Quarz Wave Plate
1/2 l, 1/4 l
1/2" x 1/2"
Cylindrical Lens
FQ, 30.00 mm x 40.00 mm, f ~ 100 mm
