GREEN LASERMODULES
RLTMGL-501
RLTMGL-501-1, 500.8 nm, 1 mW cw, stability <10%, laser head 141 x 46 x 73 mm³
RLTMGL-501-2, 500.8 nm, 2 mW cw, stability <10%, laser head 141 x 46 x 73 mm³, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: <1.2
- beam divergence: <1,5 mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >50:1
- operating temperature: 15 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-LED, output power continuously adjustable with current display, 100 - 240 VAC
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
RLTMGL-515
RLTMGL-515-05, 515 nm, 5 mW cw, stability <10%, laser head 212 x 88 x 74 mm³
RLTMGL-515-10, 515 nm, 10 mW cw, stability <10%, laser head 212 x 88 x 74 mm³
RLTMGL-515-15, 515 nm, 15 mW cw, stability <10%, laser head 212 x 88 x 74 mm³, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- PSU-H-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: <2.0
- beam divergence: <2.0 mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 3.0 mm
- polarisation ratio >100:1
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-H-LED, output power continuously adjustable with current display, 100 - 240 VAC
- PSU-H-OEM, driving electronics only, no power supply included, for system integration
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
RLTMGL-523.5
RLTMGL-523-20, 523.5 nm, 20 mW cw, stability <10%, laser head 141 x 46 x 73 mm³
RLTMGL-523-50, 523.5 nm, 50 mW cw, stability <10%, laser head 141 x 46 x 73 mm³
RLTMGL-523-100, 523.5 nm, 100 mW cw, stability <10%, laser head 141 x 46 x 73 mm³, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: <1.2
- beam divergence: <1.5mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >100:1 (0 or 90 degree)
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-LED, output power continuously adjustable with current display, 100 - 240 VAC
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- <5% stability
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
RLTMGL-526.5
RLTMGL-526-20, 526.5 nm, 20 mW cw, stability <10%, laser head 141 x 46 x 73 mm³
RLTMGL-526-50, 526.5 nm, 50 mW cw, stability <10%, laser head 141 x 46 x 73 mm³
RLTMGL-526-100, 526.5 nm, 100 mW cw, stability <10%, laser head 141 x 46 x 73 mm³, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: <1.2
- beam divergence: <1.5 mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >100:1 (0 or 90 degree)
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-LED, output power continuously adjustable with current display, 100 - 240 VAC
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- <5% stability
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
CW532 low cost miniature DPSS laser module series
CW532-001, 532 nm, <1 mW, APC, 1.2 mrad, cw, 12 x 31 (47) mm, 3.0 VDC, <300 mA, LASER CLASS 2
CW532-005, 532 nm, <5 mW, APC, 1.2 mrad, cw, 12 x 31 (47) mm, 3.0 VDC, <300 mA
CW532-010, 532 nm, <10 mW, APC, 1.2 mrad, cw, 12 x 31 (47) mm, 3.0 VDC, <300 mA
CW532-020, 532 nm, <20 mW, APC, 1.2 mrad, cw, 12 x 31 (47) mm, 3.0 VDC, <300 mA
CW532-030, 532 nm, 30 mW, ACC, 1.2 mrad, cw, 12 x 31 (47) mm, 3.0 VDC, <400 mA, datasheet
CW532-050, 532 nm, 50 mW, ACC, 1.2 mrad, cw, 12 x 33 (50) mm, 3.0 VDC, <650 mA, datasheet
CW532-100, 532 nm, 100 mW, ACC, 1.2 mrad, cw, 12 x 33 (50) mm, 3.0 VDC, <650 mA, datasheet
- DPSS laser module
- vw operating mode
- automatic power control (1 - 20 mW)
- automatic current control (30 - 100 mW)
- supply voltage 2.7 - 3.3 VDC
- warm up time: <3 s
- M² factor: <1,2
- beam divergence: <1.2 mrad
- beam diameter at aparture: 1.5 mm
- operating temperature: 15 - 35 °C
- lifetime: 3.000 hours
- additional cooling required
RLDD532
RLDD532-1-3, 532 nm, 1 mW, APC, 0.5 mrad, cw, 16 x 85 mm, 3.0 VDC, LASER CLASS 2, datasheet
RLDD532-3-3, 532 nm, 3 mW, APC, 0.5 mrad, cw, 16 x 60 mm, 3.0 VDC, datasheet
RLDD532-5-3, 532 nm, 5 mW, APC, 0.5 mrad, cw, 16 x 60 mm, 3.0 VDC, datasheet
RLDD532-10-3, 532 nm, 10 mW, APC, 0.5 mrad, cw, 20 x 80 mm, 3.0 VDC, datasheet
RLDD532-50-5, 532 nm, 50 mW, APC, 0.5 mrad, cw, 42 x 80 mm + 37 x 37 x 39 mm³ driver 5.0 V, datasheet
- DPSS laser module
- cw operating mode
- TEMoo beam mode
- automatic power control
- power stability: <20 %
- supply voltage 2.7 - 3.3 VDC
- warm up time: <15 min
- M² factor: <1,2
- beam divergence: 0.5 mrad
- beam diameter at aperture: 5 mm
- operating temperature: 15 - 30 °C
- lifetime: >5.000 hours
RLTMGL-532
RLTMGL-532-50, 532 nm, 50 mW cw, stability <5%, laser head 141 x 46 x 73 mm³
RLTMGL-532-100, 532 nm, 100 mW cw, stability <5%, laser head 141 x 46 x 73 mm³
RLTMGL-532-200, 532 nm, 200 mW cw, stability <5%, laser head 141 x 46 x 73 mm³
RLTMGL-532-300, 532 nm, 300 mW cw, stability <5%, laser head 141 x 46 x 73 mm³
RLTMGL-532-500, 532 nm, 500 mW cw, stability <5%, laser head 141 x 46 x 73 mm³
RLTMGL-532-1W, 532 nm, 1000 mW cw, stability <5%, laser head 155 x 77 x 60 mm³
RLTMGL-532-3W, 532 nm, 3000 mW cw, stability <5%, laser head 235 x 99 x 95 mm³, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- TEMoo beam profile
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: <1.2
- beam divergence: <1.5mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >100:1 (0 or 90 degree)
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-LED, output power continuously adjustable with current display, 100 - 240 VAC
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- output stability<3%, <1% stability
- TTL / Analog modulation up to 30 kHz
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
DPSSL-532
DPSSL-30, 532 nm, 30 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-50, 532 nm, 50 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-60, 532 nm, 60 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-70, 532 nm, 70 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-80, 532 nm, 80 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-90, 532 nm, 90 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-100, 532 nm, 100 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-150, 532 nm, 150 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-200, 532 nm, 200 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-300, 532 nm, 300 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-400, 532 nm, 400 mW cw & 30 kHz mod, 100 - 240 VAC power supply
DPSSL-500, 532 nm, 500 mW cw & 30 kHz mod, 100 - 240 VAC power supply, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- power supply 100 - 240 VAC
- output power adjustable
- power stability <5 %
- TTL or analog modulation <30 kHz
- beam diameter 1.5 mm
- beam divergence: <1.2 mrad
- beam quality M²<1.2
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 1.5 mm
- polarisation ratio 100:1 vertical
- operating temperature: 12 - 30 °C
- lifetime: 10.000 hours
- 1 year warranty
RLTMLL-532 LOW NOISE
RLTMLL-532-20, 532 nm, 20 mW cw, stability <5%, noise <1%, laser 141 x 46 x 73 mm³
RLTMLL-532-50, 532 nm, 50 mW cw, stability <5%, noise <1%, laser 141 x 46 x 73 mm³
RLTMLL-532-100, 532 nm, 100 mW cw, stability <5%, noise <1%, laser 141 x 46 x 73 mm³
RLTMLL-532-200, 532 nm, 200 mW cw, stability <5%, noise <1%, laser 141 x 46 x 73 mm³
RLTMLL-532-300, 532 nm, 300 mW cw, stability <5%, noise <1%, laser 141 x 46 x 73 mm³, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- TEMoo beam profile
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <15 min
- M² factor: <1.2
- noise of amplitude (rms, 1...20 MHz) <1%
- beam divergence: <1.5 mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >100:1 (0 or 90 degree)
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- output stability<3%, <1% stability
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
RLTMSL-532 SINGLE LONGITUDINAL MODE
RLTMSL-532-10, 532 nm, 10 mW cw, stability <5%, coherence >50 m, noise <0.5 %
RLTMSL-532-20, 532 nm, 20 mW cw, stability <5%, coherence >50 m, noise <0.5 %
RLTMSL-532-50, 532 nm, 50 mW cw, stability <5%, coherence >50 m, noise <0.5 %
RLTMSL-532-100, 532 nm, 100 mW cw, stability <5%, coherence >50 m, noise <0.5 %
RLTMSL-532-200, 532 nm, 200 mW cw, stability <5%, coherence > 50 m, noise <0.5 %, datasheet, manual
FEATURES:
- diode pumped solid state laser
- single longitudinal mode
- cw operating mode
- TEMoo beam profile
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <15 min
- M² factor: <1.2
- noise of amplitude (rms, 1...20 MHz) <0.5%
- coherent lengh >50 m
- spectral linewidth <0.0001 nm
- beam divergence: <1.5 mrad
- pointing stability after warm up: <0,.5 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >50:1 (45 degree)
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- output stability<3%, <1% stability
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
RLTMGL-532 HIGH POWER SERIES
RLTMGL-532-5W, 532 nm, 5 W cw, stability <10%, laser head 333 x 140 x 125 mm³
RLTMGL-532-10W, 532 nm, 10 W cw, stability <10%, laser head 333 x 140 x 125 mm³
RLTMGL-532-15W, 532 nm, 15 W cw, stability <10%, laser head 333 x 140 x 125 mm³, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- PSU-W-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: 3.0 - 6.0
- beam divergence: <2.0 mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 4.0 mm
- noise of amplitude ~ 30%
- polarisation ratio >100:1
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-W-LED, output power continuously adjustable with current display, 100 - 240 VAC
- output stability <10%, <5%, <3%
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
- TTL / Analog modulation up to 30 kHz
GLM
GLM-1, 532 nm, 1..3 mW, cw + TTL modulation, 9 VDC
GLM-3, 532 nm, 3..5 mW, cw + TTL modulation, 9 VDC
GLM-5, 532 nm, 5..10 mW, cw + TTL modulation, 9 VDC, datasheet, manual
- low noise
- M² <2.0
- beam diameter (1/e²) <1 mm
- beam divergence <1.4 mrad
- coherence length <1 cm
- spectral linewidth <0.2 nm
- good power stability
- modulable DC - 10 kHz, digital
RLTMGL-543
RLTMGL-543-10, 526.5 nm, 10 mW cw, stability <10%, laser head 141x46x73 mm
RLTMGL-543-30, 526.5 nm, 30 mW cw, stability <10%, laser head 141x46x73 mm
RLTMGL-543-50, 543 nm, 50 mW cw, stability <10%, laser head 141x46x73 mm, datasheet, manual
FEATURES:
diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: <1.2
- beam divergence: <1,5 mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >100:1 (0 or 90 degree)
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-LED, output power continuously adjustable with current display, 100 - 240 VAC
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
- power stability <5%, <3%, <1%
RLTMGL-556
RLTMGL-556-10, 556 nm, 10 mW cw, stability <10%, laser head 141x46x73 mm
RLTMGL-556-30, 556 nm, 30 mW cw, stability <10%, laser head 141x46x73 mm
RLTMGL-556-50, 556 nm, 50 mW cw, stability <10%, laser head 141x46x73 mm
RLTMGL-556-100, 556 nm, 100 mW cw, stability <10%, laser head 141x46x73 mm, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: <1.2
- beam divergence: <1,5 mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >100:1 (0 or 90 degree)
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-LED, output power continuously adjustable with current display, 100 - 240 VAC
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
- power stability <5%
RLTMGL-561-10, 561 nm, 10 mW cw, stability <10%, laser head 141x46x73 mm
RLTMGL-561-30, 561 nm, 30 mW cw, stability <10%, laser head 141x46x73 mm
RLTMGL-561-50, 561 nm, 50 mW cw, stability <10%, laser head 141x46x73 mm, datasheet, manual
FEATURES:
- diode pumped solid state laser
- cw operating mode
- separate laser head, cooled by TEC
- PSU-III-FDA power supply 100 - 240 VAC
- warm up time: <10 min
- M² factor: <1.2
- beam divergence: <1,5 mrad
- pointing stability after warm up: <0.05 mrad
- beam diameter at aperture: 2.0 mm
- polarisation ratio >100:1 (0 or 90 degree)
- operating temperature: 10 - 35 °C
- RoHS conform
- FDA and CE certified
- lifetime: 10.000 hours
- 1 year warranty
OPTIONAL FEATURES:
- PSU-III-LED, output power continuously adjustable with current display, 100 - 240 VAC
- PSU-III-OEM, driving electronics only, no power supply included, for system integration
- fiber coupling (SM or MM fiber, FC or SMA 905 connector)
get online prices and datasheets from here: downloads
GmbH
Wiedner Hauptstrasse 76, 1040 Vienna, Austria, Europe
Tel.: +43-1-586 52 43 - 0
Fax: +43-1-586 52 43 44
UID: ATU61938489
FN: 266954 f
last update 2009-10-28
mf
